[2023] Pass Cisco 350-601 Exam in First Attempt Easily
The Most Efficient 350-601 Pdf Dumps For Assured Success
How to book the Cisco 350-601: Implementing and Operating Cisco Data Center Core Technologies Exam
These are the following steps for registering for the 350-601 exam test:
- Step 1: Visit to 350-601 exam registration
- Step 2: Sign up/log in to the Pearson VUE account
- Step 3: Search for 350-601 Certifications Exam
- Step 4: Select Date, time and confirm with a payment method
NEW QUESTION 149
An engineer must implement a new VRF that permits communication between all endpoint groups (EPGs) by default. The new EPGs and bridge domains (BDs) that are created in the new VRF must not require additional configuration to permit traffic between the newly created EPGs or BDs. Which action accomplishes this goal'
- A. Create a VRF in the common tenant.
- B. Place all EPGs in the preferred group.
- C. Provide and consume a permit any contract on the VRF level
- D. Implement a global contract.
Answer: B
NEW QUESTION 150
An engineer is implementing the Cisco ACI fabric and must create two different vPCs from leaf switches A and B.
The vPCs are deployed as follows:
* vPC 1 encompasses ports Eth 1 /1 on leaf A and B and connects to server 1.
* vPC 2 encompasses port Eth1/2 on leaf A and B and connects to server 2.
A leaf switch profile listing leaves A and B is already configured Which ACI object must be created to meet these requirements?
- A. one access port interface policy group
- B. one vPC interface policy group
- C. two vPC interface policy groups
- D. two PortChannel interface policy groups
Answer: C
NEW QUESTION 151
What is a characteristic of electronic programmable logic device (EPLD) software upgrades?
- A. ELPD module upgrades are nondisruptive
- B. ELPD upgrades are available for fabric and power supply modules.
- C. EPLD software must be upgraded when Cisco MDS NX-OS is upgraded.
- D. EPLD software should be upgraded only when instructed by Cisco TAC
Answer: C
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/6_2/release/notes/epld/epld_rn.html
NEW QUESTION 152
Refer to the exhibit.
What is the result of this series of commands?
- A. It updates the firmware on adapter 1/1/1 immediately.
- B. It activates the firmware on the next adapter boot.
- C. It verifies the firmware update on the server.
- D. It reboots the server immediately.
Answer: B
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/CLI-User-Guides/Firmware-Mgmt/4 Graphical user interface, text, application, email Description automatically generated
NEW QUESTION 153
An engineer is performing a configuration on a Cisco Nexus 5000 Series Switch. The requirement is for the current Fibre Channel IDs in VSAN 120 to be saved across reboots. The Cisco environment also must integrate with a third-party solution that requires persistent Fibre Channel IDs for the VSAN The WWN of the Cisco switch must be 33:*8:00:05:30:00:16:df and its Fibre Channel ID 0x070128 Which command set meets these requirements?
- A. Option D
- B. Option B
- C. Option C
- D. Option A
Answer: A
NEW QUESTION 154
Refer to the exhibit.
In a bidirectional PIM network using Phantom RP as an RP redundancy mechanism, two Cisco NX-OS routers have these requirements:
* R1 must be the active RP.
* R2 must be the backup RP that is used only if R1 is not reachable
Drag and drop the configuration steps to complete the configuration for Router 2. Not all configuration steps are used.
Answer:
Explanation:
NEW QUESTION 155
An engineer must recover configuration on a Cisco MDS 9000 Series switch from a previous version that was backed up to bootflash and then verify the restoration.
Drag and drop the commands on the left to the correct order on the right.
Answer:
Explanation:
NEW QUESTION 156
Refer to the exhibit.
Which action is taken to ensure that the relay agent forwards the DHCP BOOTREQUEST packet to a DHCP server?
- A. Configure the interface of the DHCP server as untrusted.
- B. Configure the IP address of the DHCP server.
- C. Enable the DHCP relay agent.
- D. Verify the DHCP snooping bindings.
Answer: B
Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/4_0/dcnm/security/configuration/guide/sec_dcnm_config/sec_dhcpsnoop.pdf
NEW QUESTION 157
An engineer is configuring VNTag between a virtualized server and a Cisco Nexus 5500 Series switch. Drag and drop the configuration steps from the into the correct order on the right.
Answer:
Explanation:
Explanation
install the virtualization feature set
Enable the virtualization feature set
Configure the port profile
Configure support for VNTag mode on the interface that connects to the server.
Configure the server to support NIV mode
Configure the vNICs of the server
https://www.cisco.com/c/en/us/support/docs/switches/nexus-5000-series-switches/117691-config-
5500switch-00.html
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5500/sw/adapter-fex/6x/ b_5500_Adapter_FEX_Config_6x/ b_5500_Adapter_FEX_Config_602N11_chapter_010.html
NEW QUESTION 158
Several production and development database servers exist in the same EPG and IP subnet. The IT security policy is to prevent connections between production and development. Which attribute must be used to assign the servers to different microsegments?
- A. IP address
- B. VMM domain
- C. VM name
- D. Data center
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/3-x/virtualization/b_ACI_Virtualization_Guide_3_0_1/b_ACI_Virtualization_Guide_3_0_1_chapter_0100.html
NEW QUESTION 159
Refer to the exhibit.
Which type of backup is required to restore a Cisco UCS configuration?
- A. full state
- B. all configuration
- C. system configuration
- D. logical configuration
Answer: C
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/cli/config/guide/1-0-2/b_CLI_Config_Guide_
NEW QUESTION 160
Refer to the exhibit.
A host with a source address 10.10.10.10 sends traffic to multicast group 239.1.1.1. How do the vPC switches forward the multicast traffic?
- A. If multicast traffic is received on Po11 Switch2, the traffic is dropped.
- B. If multicast traffic is received on Switch1 over the vPC peer-link, the traffic is dropped
- C. If multicast traffic is received on Po11 Switch2, the traffic is forwarded out only on Po20
- D. If multicast traffic is received on Po10 Switch1, the traffic is forwarded out on Po1 and Po20
Answer: A
Explanation:
https://www.cisco.com/c/en/us/support/docs/ip/multicast/214140-multicast-forwarding-in-vpc-based-on-loc.html#anc8
NEW QUESTION 161
An engineer deploys a custom guest shell rootfs onto multiple switches.
Drag and drop the steps from the left into the correct order on the right.
Export the Guest Shell rootfs.
Answer:
Explanation:
NEW QUESTION 162
Which behavior defines streaming telemetry as a push model in Cisco devices?
- A. Events and network changes generate telemetry data
- B. JSON encoded telemetry data is transported using the gRPC protocol
- C. Monitoring clients are pulling data from the network to see real-time statistics
- D. The network devices send data in JSON or GPB format to configured endpoints
Answer: D
Explanation:
Explanation
https://developer.cisco.com/docs/nx-os/#!telemetry/streaming-telemetry
https://developer.cisco.com/docs/ios-xe/#!streaming-telemetry-quick-start-guide/streaming-telemetry
NEW QUESTION 163
A network engineer needs to configure system logging on the MDS switch. The messages must be displayed with the severity level of "warning" and above. For security reasons the users must be logged out of the console after 5 minutes of inactivity Which configuration must be applied to meet these requirements?
- A. Option B
- B. Option D
- C. Option C
- D. Option A
Answer: A
Explanation:
NEW QUESTION 164
An engineer must configure Cisco Nexus 9000 Series Switches for Cisco UCS Director integration The configuration must enable automated onboarding of the switches as they come online. For security purposes, the switches must have the bare minimum of connection methods enabled. The connection protocol must allow authentication through credentials. Which protocol must be configured on the switches to allow automated onboarding?
- A. SSH
- B. SNMP
- C. Telnet
- D. HTTPS
Answer: A
NEW QUESTION 165
......
We offers you the latest free online 350-601 dumps to practice: https://freedumps.actual4exams.com/350-601-real-braindumps.html